enEnglish

What Is Battery Management System?

Nov 18, 2025

Leave a message

Battery Management System

 

A Battery Management System (BMS) is a device used to effectively manage battery packs. For electric vehicles, a well-designed BMS hardware and software can effectively increase driving range, extend battery pack lifespan, reduce operating costs, and ensure the safety and reliability of the power battery pack. The power battery management system has become an indispensable core component of electric vehicles. This chapter will focus on introducing the composition, functions, and working principles of the power battery management system.

 

System Architecture

 

A typical battery management system (BMS) hardware primarily includes a Battery Management Unit (BMU), a Cell Management Unit (CMU), sensors, wiring harnesses, etc. In the design of large-scale power battery systems, the choice of BMS architecture is crucial, directly determining the connection methods between hardware units and the software programming approach, and impacting system cost, reliability, ease of installation and maintenance, and measurement accuracy. Based on the topology between controllers in the BMS, BMSs can be broadly categorized into two types: integrated and distributed.

 

1. Integrated BM

An integrated BMS, also known as a single-unit BMS, refers to a BMS that integrates the core controller (BMU) and the cell controller (CMU) into a single controller, with the core controller directly handling data acquisition, processing, and control functions. The topology of an integrated BMS is shown in Figure 8-1.
 
Integrated BMSs are compact, have strong anti-interference capabilities, and offer fast on-board communication, facilitating synchronous data acquisition. Furthermore, they can perform all BMS functions in a single package, reducing costs. However, integrated BMSs have complex connectors and wiring harnesses, making it difficult to protect the battery system when short circuits occur in different parts of the system. They are only suitable for smaller battery modules and have poor scalability and maintainability.
Centralized BMS Architecture
 

2. Distributed BMS

 

Unlike integrated topologies, distributed architectures divide the BMS functionality into a mainboard BMU and multiple slave CMUs. The modular structure simplifies module assembly, optimizes sampling harness layout, and alleviates voltage drop inconsistencies with uniform spacing. Disadvantages include higher cost and more complex communication and control design. Based on the diversity of distributed BMS connection methods, they can be further divided into three types: star connection (see Figure 8-2), bus connection, and daisy-chain connection.

 

(1) Star Connection In a star connection, the mainboard BMU is centrally located, and each CMU module is directly connected to the BMS mainboard via a harness. Star connections facilitate point-to-point control, and the failure of a single CMU node does not significantly impact the system. However, as the number of modules increases, the complexity of the communication lines in a star connection increases exponentially, making maintenance difficult and limiting scalability. Due to limitations of the BMS mainboard ports, CMU modules cannot be added arbitrarily, making it relatively rare in large-scale applications.

 

(2) Bus Connection A bus-based system architecture facilitates modular design, as shown in Figure 8-3. The BMS is typically divided into multiple control units: BMU, CMU, and Battery Join Box (BJB). The BMU, CMU, and BJB are connected via CAN or other bus networks. The BMU performs the core algorithm functions for battery management; the CMU performs cell voltage acquisition, equalization, and temperature measurement; the BJB performs high-voltage, current, and temperature acquisition, contactor driving and diagnostics, and insulation detection for the battery pack; isolation provides electrical isolation, preventing backflow from burning out the circuit board and limiting interference amplitude.

 

The bus-based architecture offers more flexible communication connections and strong scalability, greatly simplifying hardware architecture design, achieving modularity, and improving system applicability and portability. Its main disadvantage is its relatively high cost.

 

Distributed BMS

 

Daisy-chaining is a relatively new connection method that has emerged in recent years. The interface can convert full-duplex SPI signals up to 1Mb/s into differential signals and transmit them via twisted-pair cable and a simple, low-cost transformer. For example, Linear Technology's AFE devices (LTC6811) can be interconnected to form a BMS. A small, low-cost transformer replaces the data isolator. On the main control microprocessor side, a small adapter IC (LTC6820) provides the main controller interface. While unidirectional daisy-chain networking is simple, the failure of any node can affect the communication of the entire system. Therefore, an improved ring daisy-chain, as shown in Figure 8-4, has been developed and applied in the BMS products of major new energy vehicle manufacturers such as Tesla. Compared to CAN bus connections, daisy-chaining is lower in cost and smaller in size, but it has poor scalability, a limited maximum number of nodes, and difficulty in handling battery management issues in more complex scenarios such as large-scale energy storage systems.

 

Distributed Ring Daisy-Chain Connection

 

Basic Functions

 

Generally, the basic functions of a Battery Management System (BMS) include: data acquisition, battery state estimation, energy management, safety management, thermal management, equalization control, communication functions, and human-machine interface. Figure 8-5 shows a functional block diagram of a battery management system.

 

Battery Management System Functional Diagram

 

1. Data Acquisition


Data acquisition is the foundation of all algorithms and controls in a Battery Management System (BMS). Therefore, sampling rate, accuracy, and pre-filter characteristics are crucial indicators affecting battery system performance. The data acquisition rate is determined by the scenario and function. For example, with a backup power supply, the data acquisition rate can be as low as one frame per 10 seconds or even per minute; while for objects with rapidly changing current (such as vehicles), data must be acquired at least once every 1 second, with some safety-related data requiring sampling frequencies as low as 100ms or 10ms.

 

2. Battery State Estimation


Battery state estimation mainly includes two aspects: State of Charge (SOC) and State of Health (SOH). SOC characterizes the current remaining charge of the battery pack and is the basis for estimating the driving range of an electric vehicle. SOH is a parameter used to represent the battery's remaining lifespan and other health conditions.

 

3. Energy Management


Energy management ensures that the real-time energy output and input of the battery do not exceed the battery and system's carrying capacity. In reality, a battery's charge/discharge capacity is affected by temperature, SOC, and SOH, among other factors. Simultaneously, at the system level, risks such as overheating and circuit meltdown must be avoided. Therefore, energy management is a global control process primarily using current, voltage, temperature, SOC, and SOH as inputs.

 

4. Safety Management

 

Monitoring battery voltage, current, and temperature to ensure they do not exceed normal ranges. Modern BMS (Battery Management System) not only monitors the entire battery pack but also provides refined control over extreme individual cell conditions such as overcharging, over-discharging, and over-temperature.

 

5. Thermal Management

 

Cooling the battery when its operating temperature is too high and heating it when it falls below the lower limit of its suitable operating temperature to keep the battery within its optimal operating range and maintain temperature balance among individual cells during operation. Thermal management is particularly necessary for batteries used under high-power discharge and high-temperature conditions.

 

6. Balancing Control

 

Inconsistencies in battery performance can lead to a decline in overall battery pack performance and even safety risks. Balancing circuits are installed between the individual cells in the battery pack to ensure that the charging and discharging conditions of each individual cell are as consistent as possible, thereby improving the overall performance of the battery pack.

 

7. Communication Functions

 

A crucial function of a battery management system (BMS) is to enable communication of battery parameters and information with onboard or offboard devices, providing data for charge/discharge control and vehicle control. Depending on the application, data exchange can utilize different communication interfaces, such as analog signals, PWM signals, CAN bus, or I2C serial interfaces.

 

8. Human-Machine Interface (HMI)

 

The HMI is the intermediary interface for human-machine interaction. It uses appropriate input and output devices to effectively enable dialogue and interaction between humans and the machines they operate. In a BMS, the HMI includes display information and control buttons and knobs, configured according to design requirements.

Send Inquiry