Review the Polinovel 48V 105Ah battery specifications before sourcing
Use these ratings to screen electrical, mechanical and environmental fit before requesting samples or a fleet quotation.
| Model | Golf48105-PH-RN | Cell chemistry | LiFePO4 |
|---|---|---|---|
| Nominal voltage | 51.2V | Nominal capacity | 105Ah |
| Energy | 5376Wh | Cycle life | >4000 cycles |
| Charge current | 100A | Discharge current | 200A |
| Charge cut-off voltage | 58.4V | Discharge cut-off voltage | 40V |
| Charge connector | M8 | Discharge connector | M8 |
| Dimensions (L × W × H) | 620 × 230 × 260 mm | Weight | 50 kg |
| Case material | SPCC | Listed enclosure options | IP54 / IP65 / IP67 |
| Charge temperature | 0°C to 60°C / 32°F to 140°F | Discharge temperature | -20°C to 60°C / -4°F to 140°F |
| Storage temperature | 10°C to 45°C / 50°F to 113°F | Self-discharge | <3% per month |
| Display | LED display | Communication | RS485 / CAN |
| Shipping classification | UN3480, Class 9 | Warranty | 5 years |
The source page lists IP54, IP65 and IP67 in the parameter table and describes an IP67 sealed build in the product highlights. Confirm the enclosure rating for the ordered configuration in the quotation.
Check Polinovel battery fit before ordering
Send your cart model, battery-bay dimensions and charger label. You will get a fit and charging-profile review before committing to a sample.
Choose a LiFePO4 golf cart battery for dependable fleet operation
This 51.2V/105Ah pack combines 5376Wh of stored energy with a 200A discharge rating for golf carts that need steady output across long operating days. Grade-A LiFePO4 cells, a power-type BMS and a flat discharge profile support consistent acceleration and hill performance as state of charge declines.
The LED display gives operators direct visibility of state of charge and voltage, while RS485/CAN communication supports system integration requirements. For fleet buyers, the practical value is easier status checking, fewer maintenance tasks than lead-acid systems and a clearly defined electrical interface for pre-order engineering review. If 105Ah doesn't match your route length or terrain, the full 36V to 72V lithium golf cart battery lineup covers other capacity and voltage options built on the same LiFePO4 platform.
Why fleet buyers choose the Polinovel 51.2V 105Ah battery
200A output for loaded routes
The 200A discharge rating supports sustained traction demand from golf carts, utility carts, sightseeing shuttles, patrol vehicles and resort transport. Paired with 5376Wh energy, the pack gives a fleet manager one documented baseline for reviewing route length, terrain and vehicle load before deployment.
Longer service intervals for fleet batteries
The listed cycle life is more than 4,000 cycles, and the current data states more than 80% capacity after 4,000–6,000 charge cycles. For a multi-vehicle operation, fewer battery replacements mean fewer installation events, less service scheduling and lower exposure to mid-season downtime.
Faster charging between operating windows
The source product data states that a compatible charger can reach 80% capacity in under two hours. The defined 58.4V charge cut-off and 100A charge-current specification let your engineering team check charger compatibility instead of assuming an existing lead-acid charger has the correct LiFePO4 profile. For a closer look at controller ratings and charger swap requirements before ordering, see our 48V golf cart battery buying guide.
Match the battery enclosure and BMS to your vehicle
The SPCC case gives the 48V 105Ah pack a defined metal enclosure for mobile equipment installation. Available protection ratings are listed as IP54, IP65 and IP67; specifying the required 51.2V/105Ah build at RFQ stage prevents the purchasing team from treating enclosure protection as an assumed, one-size-fits-all feature.
The integrated BMS manages overcharge, over-discharge, overcurrent, short circuit and overheating, while cell balancing supports stable pack operation. These are the control points most relevant to preventing avoidable shutdowns and maintaining uniform cell behavior in repeated fleet use. For day-to-day upkeep once the pack is in service, see our golf cart battery maintenance best practices guide.
Installation checks before ordering
- Confirm a 51.2V nominal system and compatible LiFePO4 charge profile.
- Verify the 620 × 230 × 260 mm compartment envelope.
- Match M8 charge and discharge terminal arrangements.
- Define RS485 or CAN communication requirements.
- State the required IP54, IP65 or IP67 enclosure configuration.
Plan a lithium battery deployment for golf cart and utility fleets
Golf courses and resort transport
Consistent voltage output supports smooth operation throughout the discharge cycle, while the LED display helps staff check available energy before a cart is assigned. The low-maintenance LiFePO4 design reduces routine watering and acid-related service tasks associated with lead-acid fleets.
Sightseeing and passenger shuttles
A 5.376 kWh energy rating and fast-charge capability help buyers plan around daily route schedules. BMS temperature and current protection provide defined safeguards for passenger-carrying vehicles working through repeated stop-start duty.
Utility and maintenance carts
The 200A discharge rating addresses traction demand during loaded, stop-and-go work. For procurement, the key step is matching vehicle current demand, compartment size and charger settings against the published pack ratings before conversion. Fleets running higher-voltage UTVs alongside golf carts can review the Polinovel utility vehicle battery lineup for 96V-144V configurations.
Patrol and seasonal fleets
Self-discharge is listed below 3% per month, supporting vehicles that may sit between operating periods. Storage remains subject to the published 10°C to 45°C range, giving fleet teams a concrete condition to include in off-season procedures.
Building a sample or wholesale battery order?
Polinovel can review the vehicle list, route conditions and charging setup so the quotation reflects your actual deployment.
Customize the Polinovel 48V Golf Cart Battery for Your OEM Project
Share your golf cart model, battery-compartment dimensions, connector layout, charger profile, RS485/CAN requirements and order volume. Our technical team will review mechanical fit and electrical compatibility, then confirm the available configuration for sampling and quotation.
Vehicle definition
Provide cart brand, model, system voltage, controller details, duty cycle, terrain and expected passenger or cargo load.
01
Mechanical fit
Confirm the available battery-compartment dimensions, mounting arrangement and required terminal orientation against the 620 × 230 × 260 mm pack.
02
Electrical interface
Share charger output, connector requirements, accessory loads and whether the vehicle requires RS485 or CAN communication.
03
Order definition
State sample quantity, forecast volume, destination, documentation needs and the required enclosure-protection option for quotation review.
04
Verify Polinovel battery protection and operating limits before approval
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Short-circuit protection
- Overheat protection
- Cell balancing
The protection list is tied to the current 51.2V/105Ah product data rather than a general certification claim. It gives a buyer specific BMS functions to verify during sample evaluation.
The operating window is equally important: charging is listed from 0°C to 60°C, discharging from -20°C to 60°C and storage from 10°C to 45°C. Build these limits into charger selection, vehicle controls and storage procedures so the 48V lithium golf cart battery is evaluated under its published conditions.
No product-level CE, UL, RoHS, SGS or ISO certificate is stated on the supplied target page, so none is claimed here. Request the exact test and compliance documents required for your market during quotation review. For a broader look at which certifications and warranty terms matter most during fleet procurement, see our golf cart fleet lithium battery conversion guide.
Prepare a lithium golf cart battery order for international shipping
The battery is listed as UN3480, Class 9, and the product page states that units are secured in UN3480-compliant plywood boxes. For the purchasing team, the next control point is aligning shipment documentation, destination requirements and order configuration before dispatch.
Include destination country, port or delivery address, order quantity and required paperwork in the RFQ. This allows the logistics discussion to start with the actual project route rather than a generic shipping estimate.
Confirm MOQ and lead time for your 48V battery order
The supplied product page does not publish a minimum order quantity or production lead time. State whether you need an evaluation unit, pilot batch or fleet-volume order, together with your required delivery date.
MOQ and lead time for the 5.376 kWh pack should be confirmed in the quotation for the selected enclosure rating, communication interface and shipping destination. This avoids using an unverified stock or production estimate in your deployment schedule.
View the Polinovel golf cart battery from multiple angles
Work directly with Polinovel on your fleet battery project
Polinovel manufactures lithium batteries for electric-vehicle power applications and supports OEM and fleet sourcing. Model Golf48105-PH-RN gives buyers a defined 51.2V 105Ah platform with SPCC housing, M8 terminals, LED monitoring and RS485/CAN communication.
The 5-year warranty and 24/7 battery-specialist support listed on the product page provide clear after-sales checkpoints for supplier evaluation. Use the sample stage to verify vehicle fit, charger compatibility, communication and the ordered IP protection level before fleet release.
Answers for sourcing a 48V 105Ah golf cart battery
What is the minimum order quantity for a custom ABS profile?
Every profile has a different size and weight, so there is no fixed MOQ. Most orders start from about 300 kg. Send us the drawing or weight per meter and we will tell you what that means in meters for your section.
Do you work as an OEM ABS profile manufacturer?
Yes. Dachang makes ABS profiles to customer designs. You provide the drawing or sample, we design the mold, and production only starts after you approve the samples.
What ABS resin does Dachang use?
We use ABS from well-known brands such as Chimei and Tairilac, and the grade is chosen to suit your part.
Can I specify my own resin brand and grade?
Yes. If your grade is not sold in China, we recommend a similar material for your review. This usually lowers cost and shortens material lead time.
Can you match a specific color?
Yes. Give us a Pantone number and we adjust the color to it. A physical sample is helpful when the part is highly visible.
Is there a soft or flexible ABS profile?
No. ABS is rigid and comes in solid colors or transparent types. For flexible sections, TPE, TPV or PE profiles are a better fit.
Can ABS profiles be used outdoors or in cold climates?
Standard ABS suits indoor parts and typically works from −20 °C to 80 °C, becoming brittle below that range. For long outdoor exposure, ASA or an ABS+ASA blend holds up better.
Which materials can be blended with ABS?
PC+ABS is used when a part needs more strength, while ABS+ASA improves weather resistance.
Can extruded ABS be cut, bonded or printed afterwards?
Yes. ABS processes easily and handles CNC cutting, bonding and printing, but heat during processing needs to be controlled. List any planned operations when you ask for a quote.
Do your ABS profiles meet RoHS, REACH or FDA requirements?
ABS can be supplied to comply with RoHS. Food-grade (FDA) and medical parts require specific resin brands and grades, so state the requirement and the documents you need at the quoting stage.
Do you make ABS injection molded parts or sheets?
No. We focus on extrusion, so injection molding and blow molding are outside our capability, and panels, rods and sheets are usually not customized.
Hot Tags: Polinovel 48V 105Ah Golf Cart LFP Battery, China Polinovel 48V 105Ah Golf Cart LFP Battery manufacturers, suppliers, factory
